CSA ANSI Z21.69:2015 pdf download.Connectors for moveable gas appliances.
CSA ANSI Z21.69 applies to newly produced gas appliance connectors constructed entirely of new, unused parts and materials that are intended for use with gas utilization equipment that may be mounted on casters or otherwise be subject to movement.
1.2
Connectors complying with this Standard are considered suitable for use with natural, manufactured, mixed and propane gases, and LP gas-air mixtures.
1.3
If a value for measurement as given in this Standard is followed by an equivalent value in other units, the first stated value is to be regarded as the specification.
1.4
All references to psi throughout this Standard are to be considered gauge pressure unless otherwise specified.
1.5
Annex A contains provisions that are unique to Canada.
1.6
Clause 2 contains a list of standards specifically referenced in this Standard, and sources from which these reference standards may be obtained.
1.7
In CSA ANSI Z21.69, “shall” is used to express a requirement, i.e., a provision that the user shall satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
2 Reference publications
This Standard refers to the following publications, and where such reference is made, it is to the edition listed below:
CSA Group
CAN/CSA Z234.1-00 (R2006) (withdrawn)
Metric Practice Guide
CSA B149.1-10
Natural Gas and Propane Installation Code
ANSI Z21.15-2009 (R2014) • CSA 9.1-2009 (R2014), Addenda ANSI Z21.15a-2012 (R2014) • CSA 9.la- 2012 (R2014), ANSI Z21.15b-2013 (R2014) • CSA 9.lb-2013 (R2014)
Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves
ANSI Z21.41-2014 • CSA 6.9-2014
Quick Disconnect Devices for Use With Gas Fuel Appliances
ANSI Z21.90-2001 (R2011) • CSA 6.24-2001 (R2011), Addenda ANSI Z21.90a-2003 (R2011) • CSA 6.24a-2003 (R2011), ANSI Z21.90b-2006 (R2011) • CSA 6.24b-2006 (R2011)
Gas Convenience Outlets and Optional Enclosures
American Gas Association
ANSI Z223.1-2015/NFPA 54-2015
National Fuel Gas Code
ASME
ASME B1.1-2003
Unified Inch Screw Threads (UN and UNR Thread Form)
ASME B1.20.1-2013
Pipe Threads, General Purpose (Inch)
ASME B1.20.3 -1976 (R2013)
Drvseal Pive Threads (Inch).CSA ANSI Z21.69 pdf download.