BS EN 1709:2019 pdf download.Safety requirements for cableway installations designed to transport persons – Precommissioning inspection and instructions for maintenance and operational inspection and checks.
4 General requirements 4.1 Application of this Standard The requirements of this document, together with those of standards EN 1908, EN 1909, EN 12397, EN 12408, EN 12927, EN 12929 (all parts), EN 12930, EN 13107, EN 13223, EN 13243, EN 13796 (all parts) apply to all cableway installations. 4.2 Safety principles 4.2.1 General The safety principles formulated in EN 12929-1 shall apply. In addition, the scope of this document includes the following hazard scenarios and safety measures.
5 Precommissioning inspection 5.1 General The precommissioning inspection includes: a) verifying the conformity of the installation with the technical documentation and other documents; b) checking the individual components, their interaction with each other and within their local environment; c) performing the operating test; d) submitting the required documentation to the controller; e) drawing-up a report on the test. 5.2 Verifying the conformity of the installation with the technical documentation and other documents The technical documents are specified in this document and in EN 1908, EN 1909, EN 12397, EN 12408, EN 12927, EN 12929 (all parts), EN 12930, EN 13107, EN 13223, EN 13243, EN 13796 (all parts). Compliance of the installation with the technical documentation and other documents must be verified.
6 Instructions for Maintenance 6.1 General 6.1.1 Maintenance includes: a) servicing; b) inspection; c) repair. 6.1.2 The instructions for maintenance must include the servicing work, inspections and planned maintenance measures specified in 6.1.3 to 6.4, as well as their intervals.6.1.3 The instructions for maintenance shall include the specifications required for the special inspections and, if necessary, other inspections. 6.1.4 The instructions for maintenance shall include the provisions required for the safe implementation of maintenance work. 6.1.5 The maintenance measures shall be documented at least as follows: a) list of regularly required servicing work and inspections, and the intervals thereof; b) information concerning the reference values to be observed and permissible tolerances; c) information concerning servicing work and inspections required for a specific reason; d) information about the results of the inspections and the actual values established; e) information about the repair work that has been carried out; f) confirmation of the fault-free performance of each maintenance work in the form of a signature of the person carrying out the work and, if required, of the inspector. 6.1.6 Maintenance work on safety components shall be checked by a second person and documented transparently. 6.1.7 The equipment and tools required for the maintenance of the installation, as well as the masses required for loading the carriers when testing the brakes, must be provided. 6.1.8 The equipment and fixtures needed to protect the workers shall be provided on the installation. 6.1.9 The EN 12927 series (all parts) applies to the maintenance of the cables and their end fixings.BS EN 1709 pdf download.