ANSI BHMA A156.6:2001 pdf download
ANSI BHMA A156.6:2001 pdf download.ARCHITECTURAL DOOR TRIM. 1.1 ANSI BHMA A156.6 contains requirements for door protection plates, door edgings, push plates, door pulls, Fpush bars, and pull bars. Included are strength and finish tests, and dimensional and material criteria. 1.2...
ANSI B11-6:2001 pdf download
ANSI B11-6:2001 pdf download.Safety Requirements for Manual Turning Machines with or without Automatic Control. ANSI B11-6 specifies safety requirements for the design, construction, operation and maintenance (including installation, dismantling, and transport) of the general class of manually controlled horizontal and...
ANSI B11-3:2001-R2007 pdf download
ANSI B11 3:2001-R2007 pdf download.Safety Requirements for Power Press Brakes. 1.1 General The requirements of this standard apply to those machine tools classified as power press brakes (hereinafter referred to simply as “press brakes”), which are designed and constructed for...
ANSI AWWA C702:2001 pdf download
ANSI AWWA C702:2001 pdf download.COLD -WATER METERS- COMPOUND TYPE. ANSI AWWA C702 describes the various types and classes of cold—water compound-type meters in sizes 2 in. (50 mm) through 8 in. (200 mm) and the materials and workmanship used in...
ANSI AWWA C508:2001 pdf download
ANSI AWWA C508:2001 pdf download.SWING-CHECK VALVES FOR WATERWORKS SERVICE, 2-IN. THROUGH 24-IN.(50-mm THROUGH 600-mm) NPS. ANSI AWWA C508 describes only iron-body, nonassisted, swing-check valves, 2-in. through 24-in. (50-mm through 600-mm) NPS, with mechanical-joint or flanged ends that are installed in...
ANSI ASSE A10.8:2001 pdf download
ANSI ASSE A10.8:2001 pdf download.Safety Requirements for Scaffolding- American National Standard for Construction and Demolition Operations. ANSI ASSE A10.8 establishes safety requirements for the construction, operation, maintenance, and use of scaffolds used in the construction, alteration, demolition, and maintenance of...
ANSI ARI 410:2001 pdf download
ANSI ARI 410:2001 pdf download.FORCED-CIRCUL ATION AIR-COOLING AND AIR-HEATING COILS. ANSI ARI 410 applies to ForcedCirculation Air-Cooling and Air.Hcuting Coils, as detined in Section 3 and classified in Section 4 of this standard, and for apçlication under non-frosting conditions. ANSI...
ANSI AGMA 2008-C01:2001(R2008)
ANSI AGMA 2008-C01:2001(R2008).Assembling Bevel Gears. ANSI AGMA 2008-C01 applies to the assembly of all bevel gears. The term bevel gears is used to mean straight. spiral. and hypoid gear designs. If data pertain to one or more but not all,...
ANSI A250 4:2001 pdf download
ANSI A250 4:2001 pdf download.Test Procedure and Acceptance Criteria for一Physical Endurance for Steel Doors, Frames, Frame Anchors and Hardware Reinforcings. The primary purpose of this procedure shall be to establish a standard method of testing the performance of a steel...
ANSI-UL 62:2000 pdf download
ANSI-UL 62:2000 pdf download.Flexible Cord and Fixture Wire. 1.1 These requirements cover fixture wires, hoistway cables, and flexible cords for use in accordance with the National Electrical Code. 1.2 An elevator cable that contains one or more optical-fiber members is...