ANSI SCTE 165-14:2019 pdf download.IPCablecom 1.5-Part 14: Embedded MTA Analog Interface and Powering.
This document covers requirements for the E-MTA analog interface and for powering of the E-MTA. It is the intention of this document to address requirements only for the E-MTA. Sec Section 5.3.1 for a complete description of the E-MTA.
To enable a service that meets the assumed customer expectations described in Section 1.1, three E-MTA interfaces have been identified: (1) powering the E-MTA, (2) telemetry support. and (3)the analog POTS interface.
Powering the E-MTA is critical for the service to function during periods when utility power fails. Consequently, the power consumption characteristics of the E-MTA will enable service providers to offer alternate powering techniques.
Telemetry support enables the service provider to remotely monitor the status of the E-MTA. The first application of telemetry enables remote monitoring of the E-MTA power source.
The analog POTS interface requirements ensure that ‘PE that meets telephone industry interoperability requirements (normal telephones, answering machines, etc.) will also operate in the IPCablecom environment. Note that the voice-grade analog transmission requirements are dependent on the compression algorithm utilized to transport the packetized voice signal in the IPCablecom architecture. These requirements are derived from existing PSTN requirements that are based on a full 64 kbps voice channel. Therefore, the requirements specified arc relevant only for the G.71 I audio codec. Other audio codec compression algorithms specified by IPCablecom [2] are not addressed in this specification.
Note also that the telemetry interface specified in this document is between the E-MTA and an external local uninterruptible power supply (UPS). The UPS itself is not within the scope of this document, so specific requirements for the UPS are not included here. Nonetheless, requirements for the E-MTA telemetry interface may have certain design implications on the UPS.
1.3 Motivation
IPCablecom interface specifications define a system architecture to allow vendors to develop interoperable equipment capable of’ providing packet-based voice, video and other high-speed multimedia services over hybrid fiber coax (HFC) cable systems utilizing the DOCSIS protocol. IP-based voice telephony services are one possible service application.
From time to time this document refers to the voice communications capabilities of an IPCablecom network in terms of”lP Telephony.” The legal/regulatory classification of IP-based voice communications provided over cable networks and otherwise, and the legal/regulatory obligations, if any, borne by providers of such voice communications, are not yet fully defined by appropriate legal and regulatory authorities. Nothing in this specification is addressed to, or intended to affect, those issues. In particular, while this document uses standard terms such as “call,”“call signaling,”“telephony,” etc., it should be recalled that, while an IPCableconi network performs activities analogous to these PSTN functions, the manner by which it does so differs considerably from the manner in which they are performed in the PSTN by telecommunications earners, and that these differences may be significant for legal/regulatory purposes.
ANSI SCTE 165-14 pdf download.