ANSI ISA TR 106.00.02:2017 pdf download.Procedure Automation for Continuous-Process Operations – Work Processes.
This technical report provides information regarding the work processes involved in the lit ecycle of automated procedures for continuous process operations.
The work processes that are unique to automating procedures are the primary focus. Work processes that are related to automating procedures but are also common across multiple domains such as construction, hazardous operation review, and software development may be covered in less detail or not at all.
2 References
The following referenced documents are useful for understanding this technical report. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. These references are broken into three categories? cited references, relevant references and reference of interest. These levels reflect the relative importance of the individual documents.
2.1 Cited references
ISA-TR1 06.00.01-2013, Procedure Automation for Continuous Process Operations — Models and Terminology
ANSI/ISA-i 8.2-2016, Management of Alarm Systems for the Process Industries
2.2 Relevant references
ANSI/ISA-62381 -2011 (IEC 62381 Modified), Automation Systems in the Process Industry— Factory Acceptance Test (FA T), Site Acceptance Test (SA T), and Site Integration Test (SIT)
ANSI/ISA-62382-201 2 (IEC 62382 Modified), Automation Systems in the Process Industry — Electrical and Instrumentation Loop Check
2.3 References of interest
BULLEMER, P., KIFF, L., and THARANATHAN, A. Common Procedural Execution Modes during
Abnormal Situations. Paper presented at the Mary Kay O’Connor Process Safety Center International
Symposium, College Station, TX. October 26-27, 2010. p.19.
Cooling Down – Controlling cool-down of main cryogenic heat exchanger improves LNG plant efficiency. Impact [online]. Issue 3, 2008. Available at: shell.com/globalsolutions.
DOE STANDARD 1029-92. Change Notice No.1, December 1998. Writer’s Guide for Technical Procedures.
Heard the News about Procedure Automation. Automation World [online]. February 2014. Available at:
automationworld.com.
Process Safety Management of Highly Hazardous Chemicals. 29 CFR 1910.119. 2013.
Shell develops automated LNG plant cool-down to stem losses. LNG Journal [online]. January 2009.
Available at: Ingjournal.com.
WILLIAMS, Thomas N., Jr., and COOPER, D. Procedural Automation. Mary Kay O’Connor Process
Safety Center International Symposium, College Station, TX. October 23, 2013.
WRAY, Bill. ISA1 06 and the Importance of Automating Manual Procedures. In Tech [online]. November/December 2014. Available at: isa.org.
3 Definitions of terms and abbreviations
3.1 Definition of terms
3.1.1 alarm response procedure
guidance for response to an alarm (e.g., operator action, probable cause)
NOTE Based upon ANSI/ISA-18.2-2016 standard.
3.1.2 alarm
audible, visible, or both means of indicating to the operator a process equipment malfunction, process deviation, or abnormal condition requiring a timely response
3.1.3 alert
audible, visible, or both means of indicating to the operator a process equipment malfunction or a process
condition that requires awareness, that is indicated separately from alarm indications, and which does not
meet the criteria for an alarm.ANSI ISA TR 106.00.02 pdf download.