ANSI SCTE 85-4:2017 pdf download.HMS Common Inside Plant-Management Information Base(MIB)-SCTE-HMS-HE-OPTICAL SWITCH-MIB.
This document is identical to SCTE 85-4 2009 except for informative components which may have been updated such as the title page, NOTICE text, headers and footers. No normative changes have been made to this document.
This document provides MIB definitions for HMS optical switch equipment present in the headend (or indoor) and is supported by a SNMP agent.
COPYRIGHT
The MIB definition found in this document may be incorporated directly in products without further permission from the copyright owner, SCTE.
NORMATIVE REFERENCE
IETF RFC 1907 SNMPv2-MIB
IETF RFC 2578 SNMPv2-SMI
IETF RFC 2579 SNMPv2-TC
IETF RFC 2580 SNMPv2-CONF
IETF RFC 2737 ENTITY-MIB
SCTE 36 SCTE-ROOT
SCTE 37 SCTE-HMS-ROOTS
SCTE 38-11 SCTE-HMS-HEADENDIDENT-MIB
SCTE 83-1 SCTE-HMS-HE-OPTIC-MIB
SCTE 38-1 SCTE-HMS-HE-PROPERTY-MIB
SCTE 84-1 SCTE-HMS-HE-COMMON-MIB
INFORMATIVE REFERENCE
None
TERMS AND DEFINITIONS
This document defines the following terms:
Management Information Base (MIB) — the specification of information in a manner that allows standard access through a network management protocol.
REQUIREMENTS
This section defines the mandatory syntax of the SCTE-HMS-HE-OPTICAL-S WITCHMIB. It follows the IETF Simple Network Management Protocol (SNMP) for defining
managed objects.
The syntax is given below.
SCTE-HMS-HE-OPTICAL-SWITCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE. OBJECT-GROUP
FROM SNMPv2-CONF
OBJECT-TYPE. MODULE-IDENTITY, Unsigned32. Integer32 FROM SNMPv2-SMI
DisplaySiring
FROM SNMPv2-TC
entPhysicallndcx
FROM ENTITY-MIB
HeFaultStatusHeHundredthNanoMeter,
HeTenthdB, HeTenthdBrn, HeOnOffControl
FROM SCTE-HMS-HEADENDIDENT-MIB
heOp ical SwitchGroup
FROM SCTE-HMS-HE-OPTICS-MIB;
heOpticaISwitchMIB MODULE-iDENTITY
LAST-UPDATED “200310090000Z” — Oct 9, 2003
ORGANIZATION “SCTE HMS Working Group”
CONTACT-INFO
‘SCTE HMS Subcommittee, Chairman
mailto: standards@SCTE.org”
DESCRIPTION
“The MIB module for the HMS HE Optical Switch module entities.
This MIB module is for representing optica switch equipment present in the headend (or indoor) and is supported by a SNMP agent.
This MIB is limited in its scope and intended to describe an A-B (2 input and I output) or a crossbar optical switch. Up to 2 optical inputs and 2 outputs are supported. Any devices with more than 2 optical inputs or outputs shall be covered by another MIB.
This MIB does not intend to dictate all of the nuances involved in changing control settings (automatic or manual mode, changing switch controls in each possible mode combination). The most common desired behaviors are noted but specific switch operation and behavior are left to the optical switch vendors.
Not all control enumerations must be supported. This is noted in the variables that have optional enumerations.
Refer to the associated notes for in formation on what SNMP responses should be returned for unsupported enumerations.”
ANSI SCTE 85-4 pdf download.