ANSI ESD S8.1:2017 pdf download.For the Protection of Electrostatic Discharge Susceptible Items一Symbols – ESD Awareness.
Three symbols are covered in this document. The first indicates that an electrical or electronic device or assembly is susceptible to damage from an ESD event if not properly handled. The second indicates that the material or product on which the symbol is displayed is intended to provide some level of protection to ESD susceptible devices or assemblies. The third indicates the location of an ESD common point ground terminal or connection point.
The application of these ESD symbols on products is at the discretion of the supplier and does not constitute or imply a specific level of product performance.
2.0 REFERENCED PUBLICATIONS
Unless otherwise specified, the following documents of the latest issue, revision or amendment
form a part of this standard to the extent specified herein:
ESD ADV1 .0, ESD Association Glossary of Terms2
ANSI/ESDNJEDEC JS-OO1 — ESDA’JEDEC Joint Standard for Electrostatic Discharge Sensitivity
Testing – Human Body Model (HBM) — Component Level2
ANSI/ESD S6.1, Grounding2
Softcopy artwork is available at www.esda.org.
3.0 DEFINITIONS
The following definition shall apply for the purposes of this standard in addition to those specified in the ESD Association Glossary of Terms, available for complimentary download at www.esda.org:
common point ground. A grounded device or location where the conductors of one or more technical elements are bonded.
4.0 ESD SUSCEPTIBILITY SYMBOL
The ESD susceptibility symbol incorporates a reaching hand in a triangle with a slash through it and is used to indicate that an electrical or electronic device or assembly is susceptible to damage from an ESD event.
4.1 Application
The ESD susceptibility symbol should be used on assemblies and devices that have been identified as being sensitive to ESD events.
The symbol shall not be used on materials designed for use in ESD protective areas, such as smocks, seating, worksurface materials, tools and equipment, packaging materials, or personnel grounding equipment. Refer to Section 5.0 of this standard.
The symbol may be incorporated on a sticker, label or seal used to close ESD protective packaging in order to indicate that materials inside the package are ESD susceptible.
4.2 Format
The symbol is a reaching hand with defined fingers and fingernail, in a contrasting triangle with a slash in front of the hand. See Figure 1A.ANSI ESD S8.1 pdf download.