ANSI SCTE 15:2016 pdf download.Specification for Trunk, Feeder and Distribution Coaxial Cable.
This specification applies to material, electrical and mechanical properties of seventy-five ohm coaxial cables as defined herein.
Seventy-five ohm coaxial cables are used to distribute radio frequency (R.F.), digital signals and power as applicable.
2. Normative References
The following documents contain provisions, which, through reference in this text, constitute provisions of this document. At the time of Subcommittee approval, the editions indicated were valid. All documents are subject to revision; and while parties to any agreement based on this document are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents might not be compatible with the referenced version.
2.1. SCTE References
• ANSI!SCTE 03 2008 — Test Method for Coaxial Cable Structural Return Loss
• ANSIJSCTE 11 2012 — Test Method for Aerial Cable Corrosion Protection Flow
• ANSL/SCTE 12 2011 — Test Method fbr Center Conductor Bond to Dielectric for Trunk Feeder and Distribution Coaxial Cables
• ANSI/SCTE 13 2011 — Dielectric Air Leak Test Method For Trunk, Feeder and Distribution Coaxial Cable
• ANSI/SCTE 39 2013 – Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder and Distribution Cables
• ANSI/SCTE 44 2010 — Test Method for DC Loop Resistance
• ANSI!SCTE 47 2007 – Test Method for Coaxial Cable Attenuation
• ANSI!SCTE 66 2008 – Test Method for Coaxial Cable Impedance
• ANSIJSCTE 69 2007 Test Method for Moisture Inhibitor Corrosion Resistance
• ANS[/SCTE 88 2012— Test Methods for Polyethylene Jacket Longitudinal Shrinkage
2.2. Standards from Other Organizations
• ASTM A 641-92 Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
• ANSI H35. 1 American Aluminum Association Alloy and temper Designation Systems or Aluminum lxxx
2.3. Published Materials
• No normative references are applicable.
3. Informative References
The following documents might provide valuable information to the reader but are not required when complying with this document.
3.1. SCTE References
• No informative references are applicable.
3.2. Standards from Other Organizations
• ANSI/ASQC Q9000-1 and Q9004-l
• ASTM B 211-93 Specification for Aluminum and Aluminum-Alloy Bar, Rod and Wire
• ASTM B 22 1-93 Specification for Aluminum-Alloy Extruded Bars. Rods, Wire. Shapes and Tubes
• ASTM B 233-92 Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
• ASTM B 557-94 Test Methods of Tension Testing Wrought and Cast Aluminum— and Magnesium-Alloy Products
• ASTM E 8-94a Test Methods for Tension Testing of Metallic Materials
• NEC-201 I National Electrical Code
• NFPA 70 National Fire Protection Association
3.3. Published Materials
• No informative references are applicable.ANSI SCTE 15 pdf download.